MCS 2-Way Non-Remote Damper Set (2WNR) - F80 M3 | F82 M4 | F87 M2
0 in stock
The MCS 2WNR damper is a double-adjustable damper with a unique adjustment mechanism for easy access and fast changes. Both compression and rebound damping forces are independently adjustable from one very clever knob, within easy reach under your hood or in your trunk. No more dragging a jack to pit lane, laying on the ground in your nice clothes or driving suit, or burns from hot brake components.
Damping forces are controlled by blow-off valves directly on the main piston for the most precise and accurate damping control, and not a needle valve with a smaller effective adjustment range before the needle is too far out of the orifice to influence flow.
The MCS 2WNR damper is a double-adjustable damper with an adjustment range of 14 clicks of compression and 18 settings of rebound. The 2WNR damper uses a system unique to MCS that allows the packaging of both compression and rebound control inside the damper body inside the main piston without the need for external reservoirs, and also allows both adjustments to be made with a single knob, independently.
Application specific valving covers a wide range of spring rates and eliminates the need to constantly revalve every time you want to increase or decrease your spring rate. MCS has engineered its adjustment mechanisms so each click can be felt, but never feels like you’ve gone too far.
14 Clicks of Compression Adjustment
Compression damping is easily adjusted on the 2WNR damper when the knob is in the “up” or “C” position. With 14 clicks of compression adjustment, the user can easily introduce more platform to the vehicle to make better use of their mechanical contact patch, resulting in faster lap times.
18 Clicks of Rebound Adjustment
Rebound damping is easily adjusted when the knob is in the “down” or “R” position. With 18 clicks of rebound adjustment, the user can easily introduce more spring control or change the balance of the car.
Separates the gas cavity from the oil cavity.
Main Piston Assembly
Contains proprietary internal adjustment mechanism for compression and rebound damping forces.
Creates additional lateral support on shaft-end side of shaft assembly.
Also known as piston rod. Responsible for displacing fluid in the damper body to be controlled by piston assembly and adjustment mechanism. We utilize 22mm diameter shafts for strut applications and 16mm diameter for shock applications on the 2WNR damper system.
Connected to the internal adjustment mechanism and allows the user to adjust damping forces easily.
Compression/Rebound Selector Knob
Connected to the internal adjustment mechanism. Allows user to select compression or rebound forces to be manipulated at main adjuster knob.